Release:                   IMMEDIATE ( 5/2/02 )

Contact:                  Kris Jommersbach, Gemini Communications

                                                (610) 935-1633, krisj@geminiinc.com

VICTREX® PEEK™ POLYMER DISTRIBUTOR GEARS IMPROVE PERFORMANCE ON THE RACE CAR CIRCUIT

Greenville , SC -- To drivers on the race car circuits like NASCAR, performance is everything.  It's all about getting horsepower to the drive (rear) wheels. However, when a distributor gear wears out during a race, vehicle performance significantly declines.  In its quest to develop a longer lasting gear, Performance Plastics Ltd. of Cincinnati , Ohio   turned to Victrex USA , suppliers of PEEK™ polymer, a high performance thermoplastic, for help in developing  a replacement for conventional bronze alloy gears.

             Working closely with Victrex, the company developed a proprietary PEEK™ polymer compound which outperforms the bronze alloy.  According to Frank Mills, National Sales Manager for Performance Plastics, "Tests have shown that the PEEK™ polymer gear lasts more than five times longer than the bronze alloy gear.  In fact, we don't know how long it will last as it just doesn't seem to wear out.  Bronze alloy gears, on the other hand, can wear out in the course of just one race."

            One of the major advantages of PEEK™ polymer is its ability to survive high temperatures and the wear common to dry and lubricated material contacts.  The polymer has a continuous operating temperature of 500°F (260°C) and retains a high level of physical properties close to its melting temperature of 645°F (343°C). 

            Another advantage of using PEEK™ polymer is weight reduction.  "It is actually eighty one percent lighter than the bronze alloy gear," says Mills. "The benefit of using lighter weight components is that less power is required to operate the engine.  In turn, more power is available to go to the drive wheels."

            The PEEK™ polymer gear is manufactured to the same dimensional standards as the bronze alloy gear. Polymer gears can also be made oversize to reduce backlash and increase horsepower.

            Performance Plastics developed proprietary compounding and machining technology in order to make a higher performance polymer gear.  "We developed a technology that allows us to make the PEEK™ polymer gear at a price that's attractive to consumers," says Mills.

            The polymer gear is currently being used by a number of manufacturers including Mel's Ignition of Siler City, NC, a well-known manufacturer of custom made distributors.  Owner Mel Perry includes the gear in his highest performing distributors.  "I am extremely pleased with the gear's performance," says Perry.    "I have tested it and see practically no wear at all.  With conventional metal gears, you have to replace them every 700-800 laps.  The PEEK™ polymer gears are wearing more than five times longer and that can mean an entire  season.  I'm looking forward to replacing the gear only once a year. The savings are significant in just that one area of maintenance alone."

            Performance Plastics, Ltd. is one of the pioneer molders specializing in injection molding high performance plastics. For more information, visit their website at www.performanceplastics.com.  For more information about Mel's Ignition, visit his website at melsignition.com.

            VICTREX USA Inc., a division of Victrex plc., is the sole manufacturer and supplier of PEEK™ polymer worldwide.  For more information on the properties and performance advantages of VICTREX® PEEK™ polymer, please call (800) VICTREX or visit the Victrex website at www.victrex.com.

                                                             #  #  #  #

The PEEK™ Trademark

For many years Victrex plc has been using the PEEK™ trademark to refer to its brand of Polyaryletherketone.  Victrex plc is the sole manufacturer and supplier of the PEEK™ brand polymer worldwide.  PEEK™ is a trademark of Victrex plc.